Results 1 to 6 of 6
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Sep 2016
    Location
    littleton, colo
    Posts
    109
    Rep Power
    17

    sharp mx3050 jamming

    I have a sharp mx3050 copier. The machine jams at the registration roller assy. It does throw up a code. But they have been clear out. It does this thru out the day. No jam. Just feed the paper up to the registration roller assy and runs for a minute. the panel is stuck on the display that its coping the page. I replaced sensors by the roller assy. replaced the sensor there. Any help would be nice. Thanks

  2. #2
    Senior Tech 100+ Posts Hart's Avatar
    Join Date
    Feb 2024
    Location
    Boulevard Périphérique
    Posts
    111
    Rep Power
    7

    Re: sharp mx3050 jamming

    Quote Originally Posted by clark View Post
    I have a sharp mx3050 copier. The machine jams at the registration roller assy. It does throw up a code. But they have been clear out. It does this thru out the day. No jam. Just feed the paper up to the registration roller assy and runs for a minute. the panel is stuck on the display that its coping the page. I replaced sensors by the roller assy. replaced the sensor there. Any help would be nice. Thanks
    56-05 to export the data to an USB stick then publish it.
    What happens if you put the copier in aging misfeed 7-1 ?

  3. #3
    Service Manager 1,000+ Posts bilyahn's Avatar
    Join Date
    Dec 2006
    Location
    Quincy, CA
    Posts
    1,433
    Rep Power
    54

    Re: sharp mx3050 jamming

    I had this happen on a 4071. jams with no jam code listed then it would code out with an H5-01 error. Replaced the POD1 sensor and all was good.

    Good luck.

    Bil

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Jan 2012
    Posts
    122
    Rep Power
    26

    Re: sharp mx3050 jamming

    yea ive had to replace a few pod1 sensors on these as well, I believe there was a tech bulletin back in the day on them.

  5. #5
    Technician
    Join Date
    Dec 2011
    Location
    Texas
    Posts
    44
    Rep Power
    26

    Re: sharp mx3050 jamming

    If it's sitting there at the reg/ps roller, check the log for pri_jam. That would be the HDD because its trying to process the job and it will wait there for the data.

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Sep 2016
    Location
    littleton, colo
    Posts
    109
    Rep Power
    17

    Re: sharp mx3050 jamming

    Thank you. That makes since.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here