IM-4511/AR-M355 developer units compatible?

[Buddy]

Before I make a wasted trip to the customer, I was hoping someone might know if the dv units are interchangeable. Thanks!

[lky1978]

Dont waste time. both not compatible.
im-4511 using SHARP AR-M450 dv unit.

[Buddy]

Just want to be clear Ilky. Are you telling me I should order a 350, NOT a 355 for the im4511? Tanks

[lky1978]

Just want to be clear Ilky. Are you telling me I should order a 350, NOT a 355 for the im4511? Tanks

yes.arm350 developer unit is compatible with imagistics im4511

[hellcat]

I am not sure if it is compatible or not

however just swap out the dv sensor chip and make sure the connector on the back looks the same if it isnt swap it off and it will work. Do this a lot with ARM237 series and ARM450/455's

[Buddy]

yes.arm350 developer unit is compatible with imagistics im4511

Heading out to the customer tomorrow with the new dv unit, Ilky. Just want to make sure. I just add new developer and calibrate and then I'm good to go? Thanks again.

[lky1978]

fyi, dv unit with part no.CBOX-0125DS51 compatible with
SHARP MODEL: AR-M280, AR-M300, AR-M350, AR-M450
AND OCE IMAGISTIC MODEL:IM3510,IM4510,IM3511,IM4511,IM3512, IM4512

YES.just put new developer and run sim25-02.have a nice day

[Buddy]

Much appreciated Ilky. Have a great weekend!

[BillAgudelo]

Hey, Iky,
I find your post very interesting. My case is this: My customer has IM-3512 which is supposed to be the same as Sharp MX-M350N. I bought the DV-unit for the MX-M350N (part #CBOX 0125DS60) and it fits but is NOT recognized by the IM-3512. I still get the message "Insert Developer". What can I do?
Thanks in advance.
Bill

[lky1978]

Bill,
Only sharp old model ar-m450/350 dv box unit compatible with oce im3512.
Beware some ar-m450 new dv box unit with doctor blade issue during production year 2010