Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 9 of 9
  1. #1
    Field service tech. 100+ Posts Froota's Avatar
    Join Date
    Apr 2008
    Location
    Belgium
    Posts
    128
    Rep Power
    36

    C4-00 on Sharp MX-2310

    Hello,

    We have some trouble with error code C4-00 on a Sharp MX-2310.
    We already checked if this could be solved by replacing the PTC, but still having the code after replacing twice the unit.
    After this we also checked the switch 8 bit 3, in sim 55-1, but without result. Also the contact from the PTC with the harness is not bad.
    Resetting the maintenance count, and also the trouble reset (sim 14) doesn't give any solutions.

    There is a modification on the ptc holder of a MX-2600 relating to similar problems, but the engine is very different to this one.
    Also no exceptions on the 1st and second transfer unit.

    Is this problem known to someone?

    Kind regards,

    Froota

  2. #2
    Legendary Frost Spec Tech 2,500+ Posts
    C4-00 on Sharp MX-2310

    Akitu's Avatar
    Join Date
    Oct 2010
    Location
    Thompson, MB
    Posts
    2,596
    Rep Power
    97

    Re: C4-00 on Sharp MX-2310

    From the manual:

    PTC trouble (TC high voltage trouble)

    PCU
    The PTC unit is not installed properly.
    /Trouble.
    The primary transfer unit is not installed properly./
    Trouble.
    The secondary transfer unit is not installed properly./
    Trouble.
    High voltage TC PWB trouble.
    PCU PWB trouble.
    Connection trouble of the connector and the harness.

    Replace the PTC unit.
    Replace the primary transfer unit.
    Replace the secondary transfer unit.
    Check disconnection of the high voltage TC PWB
    connector./Replace.
    Replace the high voltage TC PWB.
    Replace the PCU PWB.

    You say there's no problem with primary or secondary transfer, so have you checked the HVT PWB or the PCU PWB?
    Cthulhu for president! Why settle for the lesser evil?

  3. #3
    Service Manager 5,000+ Posts
    C4-00 on Sharp MX-2310


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: C4-00 on Sharp MX-2310

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

  4. #4
    Senior Tech 250+ Posts spanky's Avatar
    Join Date
    Sep 2012
    Location
    Md
    Posts
    468
    Rep Power
    38

    Re: C4-00 on Sharp MX-2310

    See atteched bulletin
    Attached Files Attached Files

  5. #5
    Field service tech. 100+ Posts Froota's Avatar
    Join Date
    Apr 2008
    Location
    Belgium
    Posts
    128
    Rep Power
    36

    Re: C4-00 on Sharp MX-2310

    Quote Originally Posted by Akitu View Post


    You say there's no problem with primary or secondary transfer, so have you checked the HVT PWB or the PCU PWB?

    The high voltage TC PWB did the trick.....

    Thx for the support!

  6. #6
    Technician
    Join Date
    Oct 2015
    Posts
    10
    Rep Power
    18

    Re: C4-00 on Sharp MX-2310

    That fixed it for me too, on two machines now

  7. #7
    Junior Member
    Join Date
    Nov 2019
    Location
    MUBI
    Posts
    1
    Rep Power
    0

    Re: C4-00 on Sharp MX-2310

    Quote Originally Posted by Froota View Post
    The high voltage TC PWB did the trick.....

    Thx for the support!
    Please can i get the picture of what is High Voltage TC PWB, i am new in repairs but i used the machine,

  8. #8
    Senior Tech 250+ Posts
    Join Date
    May 2010
    Location
    Dallas, TX
    Posts
    310
    Rep Power
    38

    Re: C4-00 on Sharp MX-2310

    there is also a bulletin about changing the plastic holder for the pwb to spread them further apart to prevent arcing and electrical noise leading to failure. Its a good idea to replace both anytime you have this issue....

  9. #9
    Senior Tech 100+ Posts ridgemill's Avatar
    Join Date
    Sep 2017
    Location
    Bristol
    Posts
    140
    Rep Power
    19

    Re: C4-00 on Sharp MX-2310

    C4-00 can be either faulty PTC, faulty TC PWB, or faulty clutch.

    See below tech reports.
    Attached Files Attached Files

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here