AR286 with code f2-31 after adding Toner...

[postalguy]

I could use a service manual for this machine also.

Basically, it asked for toner so I gave it what it wanted, now its asking for a service with code F2-31.

Can we remove this code, or did I screw something up? All help is appreciated.

thanks guys...

[ZOOTECH]

Your toner add roller is worn - dumping toner into developer. Replace foam roller and seals in toner hopper, should take care of trouble. You may have to replace developer and re-calibrate.

[mnm]

I have the manual for this machine. I could email it to you however it's about 8.6MB

[postalguy]

I have the manual for this machine. I could email it to you however it's about 8.6MB

I have a gmail account that will take it I'm sure... I'd appreciate it.

[blackcat4866]

There's nothing I can add to the previous posts. Just wear your black shirt. Dumping the hopper can be messy.

[JDE75]

You need to replace toner roller nrolp1211 and the seals. Then you should be okay. What I have noticed is the toner roller goes bad, it's a spogy roller and once you replace it you should be fine.

[DINGO]

hello
y have that problem to, and the problem is realy in the roller box that is not good , why the friends in tis post said, but if you want, the roller must be replace, but the developer you can do it fine again, if are a technical, whith the secrets cods disable de sensor developer, elevate value, make a dark copies , and when the developer value was again in about 125, enable the developer sensor in secrets cods.
If you are not a tecnician, forguet this, and replace de developer it´s much more easy.
If you are a tech. and the copier is your, and dónt have the roller box, after recuperate the developer, whem you want put toner, open the toner box and put manualy with care, for the toner dónt go so much to the developer.
by, i´m sorry my english y try.