Seem to have a problem with mx 453 machine. Internal prints and copies are super light dev maintenance kit and drum have been changed and stir same problem.
Seem to have a problem with mx 453 machine. Internal prints and copies are super light dev maintenance kit and drum have been changed and stir same problem.
Have you emergency stopped the machine yet to see if you're getting a properly developed image on the drum? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
i have been having this same problem with a 453. full pm and copies look excellent for around 5-6k then goes light again. my next step is to repl dv unit. and see what happens
Already try to clean the Toner Density sensor?
if your asking me, then yes i did. had one of the smaller sharps (cant remember the model, the replacement for the 237 257 ect..) kept doing this also and turned out to be the pcu pwb. hope it doesnt come to this so tryin a dv unit first
change sim 46-19 AE_MODE from mode 2 to mode 1
have anyone found the issue with this problem?
Bookmarks