Results 1 to 2 of 2
  1. #1
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,512
    Rep Power
    125

    Mojos Fix FN15/16 : F1-03

    I have seen this a few times; had one yesterday so I took a few pictures. This is a FN16 finisher with an immediate F1-03 error at power up. The swing gate opens and stays open.
    The rear pivot point for the swing gate pops out, causing the actuator to miss 1 of the switches. This is a pic of the rear pivot point, main control pwb is removed:
    swing gate rear pivot.jpg
    If you remove the upper exit finisher cover, you can access the double switch:
    fn16 swing gate.jpg
    One of the switch arms gets on top of the actuator switch arm jumped.jpg.....instead of behind it switch arm normal.jpg
    Re-seat the rear pivot, check the switch arms, good to go.
    Hope it helps.


    Failing to plan is planning to fail!!!

  2. #2
    Senior Tech 100+ Posts Jhonjon's Avatar
    Join Date
    Sep 2013
    Location
    Penang
    Posts
    205
    Rep Power
    24

    Re: Mojos Fix FN15/16 : F1-03

    Thanks' for sharing...

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here