Thanks: 0
Likes: 0
Dislikes: 0
Hello.
I have a bizhub C350 and it prints like in the attached images. First off all I don't have a service manual for it. If someone can help me with one...
I've cleaned the leds, but the problem still persists.
Can I test the Imaging units by switching places between them?
I could bet some money on your problem being the Magenta IU. You can't swap the different IUs between them, but you can swap two IUs of the same colour between two machines without any problem.
' "But the salesman said . . ." The salesman's an asshole!'
Mascan42
'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
Ibid
I'm just an ex-tech lurking around and spreading disinformation!
looks like the transfer voltage off for the magenta.
r37473513 can you be more specific?
Mr Who has the right idea. Magenta Image Unit.
Cheers.
The force will be with you always.
I also concur with the IU as being the culprit.
It might also be something as simple as the erase lamp being dirty for that IU.
Remove the IU from the machine, you will see the LED array (long dark glass) on the right and the erase lamp on the left of that. It is possible that erase lamp has some dirt on the surface....
On the door, should be a long metal wand...on one end a pad...you can run that along the lamp, and for that matter, the LED array, to clean them.
If that does not resolve, replace the IU.
"Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
Reply With Quote
Bookmarks