Hello, thanks for answering.
I have been a photocopier technician since 1985. Currently I am maintaining Ricoh proc 9100, proc5100 and others
I have the technical manual.
When turning on the machine it says:
Machine status: Unit Setting error.
Copier, printer: Error Ocurred
Toner Cartridge Setting error: Toner Cartridges are not set: Black
Open the following part. (Door) then set correctly
Actions:
a- Put in a new toner.
b- Change PCDU and toner
c- Check chip ID contacts
d- Check continuity of wires from ID chip connector to main board
e- Consult other Ricoh technicians, nobody knows how to solve a problem
Can I send you the photographs in JPG?
My email is
digilaser@yahoo.com
Bookmarks