Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16
  1. #11
    Master Of The Obvious 10,000+ Posts
    KM-1650 Laser Unit needed

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: KM-1650 Laser Unit needed

    It's loud enough now that the cats scatter when I send prints (preferably less than 10 to avoid the lightening bolt patterns). =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  2. #12
    Service Manager 1,000+ Posts
    KM-1650 Laser Unit needed


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: KM-1650 Laser Unit needed

    Is it the "winding down" noise after a copy? I'm surprised you can't lube it. Granted when I did it was much younger than yours but the polygon assy quieted right down.

  3. #13
    Master Of The Obvious 10,000+ Posts
    KM-1650 Laser Unit needed

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: KM-1650 Laser Unit needed

    No ... it's more like the 747-landing-in-your-living-room sound. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #14
    Service Manager 1,000+ Posts
    KM-1650 Laser Unit needed


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: KM-1650 Laser Unit needed

    I can't believe you've gotten over 3,500 views for this 15 year old POS. Move on.

  5. #15
    Senior Tech 100+ Posts Dickie's Avatar
    Join Date
    Nov 2011
    Location
    Leicester
    Posts
    187
    Rep Power
    27

    Re: KM-1650 Laser Unit needed

    I've got a whole scrap machine badged as Olivetti d-copia 16 but am in the U.K

  6. #16
    Master Of The Obvious 10,000+ Posts
    KM-1650 Laser Unit needed

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: KM-1650 Laser Unit needed

    I'll check back with you in a few weeks, once Covid19 has moved on. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here