ricoh mp c4503 charge rollers

[mrgene]

does any one know of where or have any of these for sale. I don't want the kit or drum units just the charge roller.
thanks

[copier tech]

does any one know of where or have any of these for sale. I don't want the kit or drum units just the charge roller.
thanks

These have been available for a while now 9/10 the charge roller is the cause of the lines not the PCU.

Charge Roller D2422061

[Phil B.]

does any one know of where or have any of these for sale. I don't want the kit or drum units just the charge roller.
thanks

are they TORN BUBBLED (Toss)

or just dirty causing lines?

if the latter ,,,

get some Nu Finish

rub some one the roller..work it in good buff off

if you see its still there .. try again (may take 3 tries)

clean all excess off reinstall + test.

I have used this trick on PCR's since the Canon/HP SX days.. on up and thru the Ricoh's.

Never found one except Samsux that it didn't work on.

Precision Roller - ItemsInc

Once A Year Car Polish(R) | NuFinish

PrecisionRoller.com: Online Shopping for Toner Cartridges & more

https://www.iteminconline.com/index.asp?url=IND

[mga]

does any one know of where or have any of these for sale. I don't want the kit or drum units just the charge roller.
thanks

Some dealers in the UK use a green scotch pad with platen cleaner remove brown coating so all you can see is white it work for another 20k {don't rub to hard}

But I just replace charge assy unless pcu is over life as well

[Phil B.]

Some dealers in the UK use a green scotch pad with platen cleaner remove brown coating so all you can see is white it work for another 20k {don't rub to hard}

But I just replace charge assy unless pcu is over life as well

scotch brite can ruin a PCR surface.

the Nu Finish Car Polish is no abrasive and as long as you don't leave some on PCR to transfer to the OPC it will not have issues.

there is another upside that I forgot to mention. I does make the print crisper and a little bolder resulting in crisp colors and longer life on the drums ( even Over life on most drums ) they were rated at 120 impressions and we were getting 150-180+ after doing this.

our setup guys had me do the trick to extra sets of drums so they could get the machines in the field w/ the trick and not have the road warriors have to mess with in the field.

P.S. I got a steak dinner and a $200 check from the boss for this tip!

[AL parts]

AD02-7050

MPC4503/5503/6003
MPC4504/5504/6004

Primary Charge Roller

[fshead]

AD02-7050

MPC4503/5503/6003
MPC4504/5504/6004

Primary Charge Roller

have not done the 03s yet but 01s,02s and i use a scouring pad with alcohol and try to pull the PCR cleaning roller b4 doing so.
always worry about using any chemicals and mucking up drum blade/brush.
DOES THE 03 PCR roller come out easily?

[mga]

AD02-7050

MPC4503/5503/6003
MPC4504/5504/6004

Primary Charge Roller

Don't forget to replace the cleaning roller @ the same time {you can't get that from ricoh}

[copier tech]

Some dealers in the UK use a green scotch pad with platen cleaner remove brown coating so all you can see is white it work for another 20k {don't rub to hard}

But I just replace charge assy unless pcu is over life as well

My lads do this its a quick fix........

[AL parts]

al501001.jpgReplacing this kit is equivalent to owning a new 400K drum unit