Results 1 to 6 of 6
  1. #1
    Senior Tech 250+ Posts
    Strechy feed tires


    Join Date
    Jun 2013
    Location
    WI
    Posts
    368
    Rep Power
    20

    Strechy feed tires

    Just wondering if those strechies are still availiable? Finding some uses again and just about ran out. Just wondering. TIA.

  2. #2
    Senior Tech 250+ Posts
    Strechy feed tires


    Join Date
    Jun 2013
    Location
    WI
    Posts
    368
    Rep Power
    20

    Re: Strechy feed tires

    The strechies for the feed tires. Strech over the roller for better feeding.

  3. #3
    Senior Tech 100+ Posts
    Strechy feed tires


    Join Date
    Feb 2017
    Location
    Riverside
    Posts
    119
    Rep Power
    14

    Re: Strechy feed tires

    Haven't seen that stuff in years. We used to get them from Copylite back in the day. Wasn't there also a feed tire tape?

  4. #4
    Service Manager 2,500+ Posts
    Strechy feed tires

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    4,803
    Rep Power
    101

    Re: Strechy feed tires

    Quote Originally Posted by wjurls View Post
    Haven't seen that stuff in years. We used to get them from Copylite back in the day. Wasn't there also a feed tire tape?
    Never heard of this. Would be better off simply using a bit of sand paper to rough up the rollers!?

    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  5. #5
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    12,327
    Rep Power
    305

    Re: Strechy feed tires

    Quote Originally Posted by wjurls View Post
    Haven't seen that stuff in years. We used to get them from Copylite back in the day. Wasn't there also a feed tire tape?
    Yeah Copylite used to have a ribbed tape that could be put on feed tires.

  6. #6
    Flawed Scrub 500+ Posts
    Strechy feed tires

    jmaister's Avatar
    Join Date
    Aug 2010
    Location
    somewhere
    Posts
    680
    Rep Power
    32

    Re: Strechy feed tires

    Quote Originally Posted by copier tech View Post
    Never heard of this. Would be better off simply using a bit of sand paper to rough up the rollers!?

    you may not want that... it wears quicker. I did that once to a feed belt... within 3 months... i got a call back. The belt was then shiny...would just misfeed.

    sanding takes material out and breaks the surface consistency, and rubber break down quicker...
    An idling develper is not a healthy developer.

    A long idle time to low power fuser has a short life.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here