Dislikes:
0
-
Junior Member
- Rep Power
- 0
Toshiba e studio 257, error F101-1!
Good Morning,
I'm having troubles with a Toshiba e-studio 257. After a power surge the printer gets stuck on the error F101_1, i have the original install software T330ALL0W1281_USB.zip, from what i have found and read from the internet i believe this is a hard drive problem ( F101_1 is ADI HDD error, the root partition got corrupted unable to mount it).
I tried the following:
1. Perform [3C] - [5] (Key Backup Restore) and check that each Key Status is "OK".
If not, recover the key (copy "SRAM Key Status" to "FROM Key Status" or vice versa).
===> The keys are ok.
2. Perform [3C] - [3] (Format HDD), and then install "System Software (HD data)" with [49] - [4].
===> I have formatted the disk and install the software and i still get F101_1.
3.If F101_1 occurs with ADI-HDD or the error persists after performing step 3, perform step 3 after performing [4]+[C]+[POWER]→1. Revert factory initial status HDD.
===> I still get F101_1.
IF problem come's back, you need to replace new HDD & update latest firmwares.
What procedure is needed to replace the HDD on this model? Can i replace it with a normal smaller sata HDD 250GB, right now i have ADI HDD sata 500GB.
Thanking you in advance and looking forward for your reply.
King regards,
Florin
-
Senior Tech
100+ Posts
- Rep Power
- 14
Re: Toshiba e studio 257, error F101-1!
You need a HDD, Toshiba wipe technology.
G0-00732000 is part number.
Replace hdd, perform clear & 3 then 3 format hdd
Then clear & 3, 2 partition hdd
Installed firmware, after firmware is done. Reboot in 08,and push firmware 9030 and initialize. This can take up to 20 minutes to complete.
I airways calibrate the display after hdd replace, otherwise it will be a return call.
Hope this helps
-
Junior Member
- Rep Power
- 0
Re: Toshiba e studio 257, error F101-1!
Could you please explain in detail the part "Replace hdd, perform clear & 3 then 3 format hdd Then clear & 3, 2 partition hdd".
Sorry i but i don't understand.
Also with the broken disk i tried to enter in [0] [8] + power after i reinstall the software. And it's not working i guess the disk is dead.
The funny part is i don't get any error when i install the software or when i format the disk.
Thanking you in advance and looking forward for your reply.
-
Senior Tech
100+ Posts
- Rep Power
- 17
Re: Toshiba e studio 257, error F101-1!
If u tried format hdd & update firmware, but the problem come back, then definitely the hdd need to replace...
U need ADI HDD (Wipe technology), follow your previous steps format hdd & update firmware, new firmware is auto initialize, or manual 08-9030, once everything is ok and machine is ready, remember to calibrate panel.
Do pm me if u want the new ADI HDD. TQ
-
Junior Member
- Rep Power
- 0
Re: Toshiba e studio 257, error F101-1!
Sorry for the late response, i have managed to fix the printer by replacing the hdd and i have reinstalled the firmware, now everything is working great!
Thank you for helping me!
-
Junior Member
- Rep Power
- 0
Toshiba Printer Error Code C440
Very nice topic you shared. Thank you for sharing with us.If you have any issue related Toshiba laptop then click here:
Toshiba Printer Error Code C440
-
Junior Member
- Rep Power
- 0
Re: Toshiba e studio 257, error F101-1!
Hello,
can somebody send me firmware for e-studio257?
We have error f101.
Thank you!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks