Thanks: 
Likes: 
Dislikes: hi i have 2 machinesevrey 15 days displayed coad f101_2,f101_7i fixed it , but its come aginethear is any reason for this codes?
hi i have 2 machinesevrey 15 days displayed coad f101_2,f101_7i fixed it , but its come aginethear is any reason for this codes?
there are reasons for EVERY Error code...Originally Posted by mohsep
you say you fixed it one time but came back... What did you do?
this subject was covered in another old thread.. did you search CTN or even google your problem?
e studio 4555c error f101 sub code 1
There is HDD Check Tool for eBX2 models to check if the HDD needs to be replaced.
Supported models:
e-STUDIO 5055C Series
e-STUDIO2550C Series HDD model
e-STUDIO 507 Series
e-STUDIO 407CS Series
e-STUDIO 857 Series
e-STUDIO 6570C Series
e-STUDIO 307LP / Loops LP301
e-STUDIO 527S Series
HDDCheckTool.jpg
There is HDD Check Tool for
HDDCheckTool.jpg
from 3c
If you're still getting F101_7 ... even if the tool says that HDD is OK, you may still need to replace it. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Reply With Quote
Bookmarks