Results 1 to 10 of 10
  1. #1
    Junior Member Arbad technology's Avatar
    Join Date
    Jan 2019
    Location
    Rangpur
    Posts
    2
    Rep Power
    0

    Toshiba estudio 2508a light copy problem??

    Hi, can anybody help me solving the issue that toshiba estudio 2508a having very light or poor copy.

  2. #2
    Master Of The Obvious 10,000+ Posts
    Toshiba estudio 2508a light copy problem??

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: Toshiba estudio 2508a light copy problem??

    What have you done so far? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Technician Edward's Avatar
    Join Date
    May 2019
    Location
    Stambuagh
    Posts
    31
    Rep Power
    0

    Re: Toshiba estudio 2508a light copy problem??

    Quote Originally Posted by Arbad technology View Post
    Hi, can anybody help me solving the issue that toshiba estudio 2508a having very light or poor copy.
    Clean optics then do gamma calibration in user mode or admin. Make sure no generic toner.

  4. #4
    Technician
    Toshiba estudio 2508a light copy problem??


    Join Date
    May 2019
    Location
    Yuma, AZ
    Posts
    25
    Rep Power
    10

    Re: Toshiba estudio 2508a light copy problem??

    I Like Edward's reply. You can also check developer unit. Old developer? Replace. Check primary charger assembly. Clean the grid.

  5. #5
    Service Manager 5,000+ Posts
    Toshiba estudio 2508a light copy problem??

    SalesServiceGuy's Avatar
    Join Date
    Dec 2009
    Location
    Nova Scotia
    Posts
    7,698
    Rep Power
    223

    Re: Toshiba estudio 2508a light copy problem??

    How many clicks are on the copier?

  6. #6
    Technician
    Join Date
    Mar 2019
    Location
    chiah
    Posts
    14
    Rep Power
    0

    Re: Toshiba estudio 2508a light copy problem??

    I have the same issue with an ES 3508A
    The image (copy or printout) gradually became abnormally Light but when i access the toner density check under Adress 2000 in service mode the density meter shows 230% but in result the image is two light. I think i have a toner density sensor issue.
    Can anybody tell me how to reset this sensors settings and or decrease the sensor sensitivity to increase the Toner density in the developper assembly ...
    Thanknyou Guys.


    Sent from my iPhone using Tapatalk

  7. #7
    Service Manager 10,000+ Posts
    Toshiba estudio 2508a light copy problem??

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,656
    Rep Power
    658

    Re: Toshiba estudio 2508a light copy problem??

    Quote Originally Posted by Ray.lb View Post
    I have the same issue with an ES 3508A
    The image (copy or printout) gradually became abnormally Light but when i access the toner density check under Adress 2000 in service mode the density meter shows 230% but in result the image is two light. I think i have a toner density sensor issue.
    Can anybody tell me how to reset this sensors settings and or decrease the sensor sensitivity to increase the Toner density in the developper assembly ...
    Thanknyou Guys.


    Sent from my iPhone using Tapatalk
    thanks for posting a problem to a totally different machine in a thread where the OP hasn't returned to tell us of the fix over a year later.

  8. #8
    Service Manager 10,000+ Posts
    Toshiba estudio 2508a light copy problem??

    BillyCarpenter's Avatar
    Join Date
    Aug 2020
    Location
    Long Beach, Mississippi
    Posts
    13,375
    Rep Power
    448

    Re: Toshiba estudio 2508a light copy problem??

    Quote Originally Posted by Phil B. View Post
    thanks for posting a problem to a totally different machine in a thread where the OP hasn't returned to tell us of the fix over a year later.
    lol

  9. #9
    Technician
    Join Date
    Mar 2019
    Location
    chiah
    Posts
    14
    Rep Power
    0

    Re: Toshiba estudio 2508a light copy problem??

    Phil B
    The ES 2508 and 3508 share the same body with different speeds they use same components and faces similar problems i guess...


    Sent from my iPhone using Tapatalk

  10. #10
    Master Of The Obvious 10,000+ Posts
    Toshiba estudio 2508a light copy problem??

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: Toshiba estudio 2508a light copy problem??

    Just basics:

    Clean optics.
    Wand the slit glasses.
    Perform a calibration.

    And if you want a serious reply I'll need an image to look at. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here