Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: Toshiba 3005AC

  1. #1
    Senior Tech 250+ Posts
    Join Date
    Oct 2014
    Location
    wareham.mass
    Posts
    287
    Rep Power
    13

    Toshiba 3005AC

    Is there any calibration for the control panel! on the 3005AC

    Sent from my SM-N950U using Tapatalk

  2. #2
    Senior Tech 250+ Posts
    Toshiba 3005AC

    arnh79's Avatar
    Join Date
    Apr 2010
    Location
    Canada
    Posts
    323
    Rep Power
    25

    Re: Toshiba 3005AC

    No there isn't. A reboot is supposed to do an auto-calibration. There's also been firmware updates to improve the panel. But I still have a lot of failures which require a full panel replacement.
    Why does every customer think they're the first one to ever say: "you've been here so much we should get you an office, ha, ha, ha"?

  3. #3
    Technician Thayer's Avatar
    Join Date
    Dec 2017
    Location
    Burton, MI
    Posts
    49
    Rep Power
    4

    Re: Toshiba 3005AC

    I found that if I turn off machine. Clean display really well and have up to date firmware helps with display issue.

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Sep 2015
    Posts
    144
    Rep Power
    10

    Re: Toshiba 3005AC

    Crumbs and other garbage pushed under the edges of the panel will cause issues as well.

    The firmware update fixed a good deal of it.

  5. #5
    Junior Member
    Join Date
    Aug 2019
    Location
    Tasmania
    Posts
    6
    Rep Power
    0

    Re: Toshiba 3005AC

    The first batch of EBN series panels having issue...U can try update firmware, but if error still persist need to replace new type...
    There is no panel calibration, it auto calibrate during booting...

  6. #6
    Senior Tech 250+ Posts
    Toshiba 3005AC

    Blizzoo's Avatar
    Join Date
    Aug 2013
    Location
    east europe
    Posts
    353
    Rep Power
    17

    Re: Toshiba 3005AC

    Some Panels may have grounding issues which could cause unresponsive panel/scrolling by itself. If you take your time to disassemble the panel and reinforce the grounding contact of the black cable may help.

    Control panels have been changed for this kind of issues as per above comments.
    Defects are simple, our mind is complicated

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here