Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Nov 2019
    Location
    Roseville, MN
    Posts
    3
    Rep Power
    0

    Toshiba GD1320NX Fax Module Will not Initialize

    I recently installed a Toshiba ES-3555C at a customer site. It had all 4 functions (Copy/Print/Scan/Fax). It has the GD1320NX Fax module installed. All of a sudden it lost it's memory. It will not re-initalize even after going through the *1, 100/102 Fax memory initialization procedure multiple times...Even with a replacement GC1320NX unit. You can't set the terminal ID (Greyed out), nor does the copier even recognize that there is a fax board installed when you look at the machine set-up in Top Access.

    Could the System board be bad? The Ethernet Port works fine. All the pins that the GD1320NX plugs into are straight and not bent. Am getting a good connection between the pins and the plug. As well as the USB connection. So, what am I missing? The client can use the other functions, but relies on FAX quite a lot. HELP.

    CaptEd99

  2. #2
    Field Supervisor 500+ Posts
    Toshiba GD1320NX Fax Module Will not Initialize

    Blizzoo's Avatar
    Join Date
    Aug 2013
    Location
    east europe
    Posts
    580
    Rep Power
    30

    Re: Toshiba GD1320NX Fax Module Will not Initialize

    Are there any other service call codes related to HDD failures or Fax in history list?

    Check in setting mode 08-9905 if it's displaying the Fax FW version.

    If you have latest FW won't be a waste of time formatting HDD and load it fresh. Perform initialization procedures 08-9030 after FW update and color calibration procedures
    Initialize Fax Board - set destination in 08-9001, 4 is for USA/Canada.

    Connect the phone line after you checked fax functions are to be normal without the line in. I've seen bad lines
    Defects are simple, our mind is complicated

  3. #3
    Service Manager 5,000+ Posts
    Toshiba GD1320NX Fax Module Will not Initialize

    SalesServiceGuy's Avatar
    Join Date
    Dec 2009
    Location
    Nova Scotia
    Posts
    7,698
    Rep Power
    223

    Re: Toshiba GD1320NX Fax Module Will not Initialize

    Get a cheap analog handset and plug it into the Tel connector on the fax board. Do you hear dial tone?

    Any chance the customer has a VOIP line?

    Press 1,3 Power on. Set code 104 to 0 if not on a VOIP system

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here