ES 7516AC error C471

[Rusty.Harris]

I've had no C471 errors on the updated cores, but I've seen 2 belts fail prematurely. one at about 400k, and one at 150k. I did just discover the toner build up on the top plate just before i saw the post here about it, so I believe with the increased pressure, a little extra care with the paper guides is advised.

When I replace the fuser belt or kit, I check the gap on the separation plate. Most of the time, it is within spec, but I've have
about 3 out of 10 that is off.

SM 6.11.1 & 6.11.2

[stooey187]

Firmware Firmware Firmware