Toshiba 3005AC Rainbow running Lengthwise on certain halftones

**buzz** · 08-18-2020

I seen a previous post a few months back, but was for a different model. Sorry if its redundant.

Here's the samples. Its not super obvious, but it is recognizable with it in hand.

20200814_162945.jpg
20200814_162902.jpg
20200814_162824.jpg

The rainbows are subtle. It shows up on these prints with a light tan halftone graphic.

I have CMY drums and rebuild kits with grids on order.

Would this be the step in the right direction? Any feedback would be great.

What counters and calibrations do I perform after rebuilding these?

Thanks so much!

**blackcat4866** · 08-18-2020

PM interval for the 3005AC is 180K black, 90K color. (3) color rebuild includes (3) drums and EPU-KIT-FC505CLR.

You'll need to do the (3) color developer stir, and color calibration. Before you start, I'd suggest printing off the FS-30-103 PM list.

Excuse me please if I won't read you the manual. You seem perfectly able to read the procedure to stir the developer and do a color calibration for yourself. And when you figure it out for yourself you'll get that good feeling of figuring it out for yourself.

If you'd like a more detailed analysis print these pages, then show them to us:

**Vincent128** · 08-20-2020

Originally Posted by blackcat4866

PM interval for the 3005AC is 180K black, 90K color. (3) color rebuild includes (3) drums and EPU-KIT-FC505CLR.

You'll need to do the (3) color developer stir, and color calibration. Before you start, I'd suggest printing off the FS-30-103 PM list.

Excuse me please if I won't read you the manual. You seem perfectly able to read the procedure to stir the developer and do a color calibration for yourself. And when you figure it out for yourself you'll get that good feeling of figuring it out for yourself.

If you'd like a more detailed analysis print these pages, then show them to us:

Oooo...this is a new version of your file me thinks. *yoinks*