Results 1 to 9 of 9
  1. #1
    Junior Member monslytherin0101's Avatar
    Join Date
    Aug 2020
    Location
    Thành phố Thủ Dầu Một
    Posts
    3
    Rep Power
    0

    Question TOSHIBA Copier E-Studio 857 can not work!!! Please help!!

    Hi!

    My Copier ToshiBa E-Studio 857 does not work when I press START.
    I can choose the number of copies but it does not copy.
    I also can not "Factory Reset" due to the button is blurred.
    I attacked a link to a video to show you how it was.
    VID20200823200328.mp4 - Google Drive

    I acquired it as a used copier. I live in Vietnam that we usually import copiers from others.
    Actually, I have a friend who has a E-Studio E-857, too. His copier works well.
    I tried to change systems board include HDD with him, and my systems board also works well with his copier but when I set his board to my copier, that problem still happen.


    Please help and give me some solutions!!

    Thank you so much!!!
    Last edited by monslytherin0101; 09-13-2020 at 04:42 PM.

  2. #2
    Service Manager 5,000+ Posts
    TOSHIBA Copier E-Studio 857 can not work!!! Please help!!

    SalesServiceGuy's Avatar
    Join Date
    Dec 2009
    Location
    Nova Scotia
    Posts
    7,698
    Rep Power
    223

    Re: TOSHIBA Copier E-Studio 857 can not work!!! Please help!!

    Likely the system software on the copier's hard drive is corrupted.

    There is nothing you can do.

    You need to call in a trained Toshiba service technician to reload the software.

    What is the meter read on the copier?

    Was the copier purchased as 100% new or did you acquire it as a used copier?

  3. #3
    Master Of The Obvious 10,000+ Posts
    TOSHIBA Copier E-Studio 857 can not work!!! Please help!!

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: TOSHIBA Copier E-Studio 857 can not work!!! Please help!!

    My first attempt would be to re-format the HDD and re-load firmware. You'll want a technician to do this.

    If this fails you might have a bad HDD or logic PWB. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Junior Member monslytherin0101's Avatar
    Join Date
    Aug 2020
    Location
    Thành phố Thủ Dầu Một
    Posts
    3
    Rep Power
    0

    Re: TOSHIBA Copier E-Studio 857 can not work!!! Please help!!

    Hi!!

    Thanks for some solutions!

    To reply you, I acquired it as a used copier. I live in Vietnam that we usually import copiers from others.
    Actually, I have a friend who has a E-Studio E-857, too. His copier works well.
    I tried to change systems board include HDD with him, and my systems board also works well with his copier but when I set his board to my copier, that problem still happen.


  5. #5
    Master Of The Obvious 10,000+ Posts
    TOSHIBA Copier E-Studio 857 can not work!!! Please help!!

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: TOSHIBA Copier E-Studio 857 can not work!!! Please help!!

    You cannot just swap boards or HDD's on Toshiba machines. Each board and HDD is married to the other boards. There is a very specific procedure to replace only a single electronic board or HDD, never more than one at a time. Additionally the data on the HDD is encrypted with a unique encryption password. So a fully functional HDD on one machine will not work on another machine until it is re-formatted and firmware reloaded.

    You REALLY REALLY need a technician who knows what they are doing before you brick the machine for good.
    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Service Manager 10,000+ Posts
    TOSHIBA Copier E-Studio 857 can not work!!! Please help!!

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,668
    Rep Power
    658

    Re: TOSHIBA Copier E-Studio 857 can not work!!! Please help!!

    Quote Originally Posted by blackcat4866 View Post
    You cannot just swap boards or HDD's on Toshiba machines. Each board and HDD is married to the other boards. There is a very specific procedure to replace only a single electronic board or HDD, never more than one at a time. Additionally the data on the HDD is encrypted with a unique encryption password. So a fully functional HDD on one machine will not work on another machine until it is re-formatted and firmware reloaded.

    You REALLY REALLY need a technician who knows what they are doing before you brick the machine for good.
    =^..^=
    +1

  7. #7
    Service Manager 5,000+ Posts
    TOSHIBA Copier E-Studio 857 can not work!!! Please help!!

    SalesServiceGuy's Avatar
    Join Date
    Dec 2009
    Location
    Nova Scotia
    Posts
    7,698
    Rep Power
    223

    Re: TOSHIBA Copier E-Studio 857 can not work!!! Please help!!

    I would say it is now not economical to repair this copier.

    Once the user started swapping system boards and HDDs, it would take a highly skilled tech working closely with qualified tech support to bring it back.

    Either the System board of the Toshiba proprietary SED-HDD needs to be replaced. Easily $800.00 USD + labour.

    This is certainly not something that can resolved by asking for free tech support on the web.

    Too bad as the e857 was a really good copier before it was discontinued in Aug 2016.

  8. #8
    Junior Member monslytherin0101's Avatar
    Join Date
    Aug 2020
    Location
    Thành phố Thủ Dầu Một
    Posts
    3
    Rep Power
    0

    Exclamation Re: TOSHIBA Copier E-Studio 857 can not work!!! Please help!!

    Thanks for your help!

    This morning, I turned on it and it worked.
    In the afternoon, I shut down it when I turned on again, I felt that the power seemed like "low in a moment" when the machine was turning on and checking systems.
    I am trying find a fully-skilled technican but quite hard due to in my country, we usually import copiers and we almost meet error codes about hardwares.

  9. #9
    Technician
    Join Date
    May 2020
    Location
    HCM city
    Posts
    49
    Rep Power
    0

    Re: TOSHIBA Copier E-Studio 857 can not work!!! Please help!!

    Quote Originally Posted by monslytherin0101 View Post
    Hi!

    My Copier ToshiBa E-Studio 857 does not work when I press START.
    I can choose the number of copies but it does not copy.
    I also can not "Factory Reset" due to the button is blurred.
    I attacked a link to a video to show you how it was.
    VID20200823200328.mp4 - Google Drive

    I acquired it as a used copier. I live in Vietnam that we usually import copiers from others.
    Actually, I have a friend who has a E-Studio E-857, too. His copier works well.
    I tried to change systems board include HDD with him, and my systems board also works well with his copier but when I set his board to my copier, that problem still happen.


    Please help and give me some solutions!!

    Thank you so much!!!
    08 -9090 set 0

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here