To add that the transfer belt drive gear screw that holds it in place can become loose over time preventing the belt to turn. It could be a case of just tighten that screw, seen that before several times.
To add that the transfer belt drive gear screw that holds it in place can become loose over time preventing the belt to turn. It could be a case of just tighten that screw, seen that before several times.
Defects are simple, our mind is complicated
Problem was the logic board.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks