Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jan 2017
    Location
    palm bay florida
    Posts
    97
    Rep Power
    10

    2550c light copies black

    went in a week ago to very light black copies and prints i ran the toner motor for a minute copies where perfect so i calibrated the dv at that level it lasted a week and now is light again is there a 08 code for amount of toner drop to dv or what am i missing
    thanks as usual for any thoughts
    bruce

  2. #2
    Senior Tech 100+ Posts
    Join Date
    May 2015
    Location
    Derry, NH
    Posts
    130
    Rep Power
    18

    Re: 2550c light copies black

    Sounds like you are just papering over an underlying problem. You made no mention of where the copier is at in its pm schedule. Are you at or over pm and/or drive counts for this copier? Did you remove, inspect and clean the charger assy?

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Jan 2017
    Location
    palm bay florida
    Posts
    97
    Rep Power
    10

    Re: 2550c light copies black

    Quote Originally Posted by gliderider View Post
    Sounds like you are just papering over an underlying problem. You made no mention of where the copier is at in its pm schedule. Are you at or over pm and/or drive counts for this copier? Did you remove, inspect and clean the charger assy?
    machine has 26k total 20k black 6k color charger looks fine spiked dv with toner imediatly looks fine gets light a week later

  4. #4
    Master Of The Obvious 10,000+ Posts
    2550c light copies black

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,511
    Rep Power
    371

    Re: 2550c light copies black

    Well that developer is 8 years old, and not stirred very much. I'd check the developer bearings to make sure they aren't leaking, then change the D-FC30-K. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Jan 2017
    Location
    palm bay florida
    Posts
    97
    Rep Power
    10

    Re: 2550c light copies black

    oops turned out to be a defective toner all is well thanks for the input

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here