Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Technician
    Toshiba 2830c - Display/Op Panel blank.

    Pete from Prescott's Avatar
    Join Date
    Feb 2012
    Location
    Prescott, AZ
    Posts
    26
    Rep Power
    20

    Question Toshiba 2830c - Display/Op Panel blank.

    Toshiba eStudio 2830c
    Powers up, Lights in right side upper corner of panel light up, but no display.
    Worked on Tosh for years but have been away for some time doing Canons. Do these op panels just go bad?
    Thanks for your help folks!

    Pete in Prescott, AZ
    USMC 70-75

  2. #2
    Senior Tech 100+ Posts
    Toshiba 2830c - Display/Op Panel blank.

    aalex_bom's Avatar
    Join Date
    Jan 2008
    Location
    Mel
    Posts
    195
    Rep Power
    0

    Re: Toshiba 2830c - Display/Op Panel blank.

    Quote Originally Posted by Pete from Prescott View Post
    Toshiba eStudio 2830c
    Powers up, Lights in right side upper corner of panel light up, but no display.
    Worked on Tosh for years but have been away for some time doing Canons. Do these op panels just go bad?
    Thanks for your help folks!

    Pete in Prescott, AZ
    USMC 70-75
    check HDD or RAM stick on controller,
    should be rebuild firmware if the HDD fault.

    good luck.

  3. #3
    Technician
    Toshiba 2830c - Display/Op Panel blank.

    Pete from Prescott's Avatar
    Join Date
    Feb 2012
    Location
    Prescott, AZ
    Posts
    26
    Rep Power
    20

    Question Re: Toshiba 2830c - Display/Op Panel blank.

    Not sure I understand...
    ..."should be rebuild firmware if the HDD fault".

  4. #4
    Service Manager 10,000+ Posts
    Toshiba 2830c - Display/Op Panel blank.

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,319
    Rep Power
    379

    Re: Toshiba 2830c - Display/Op Panel blank.

    Quote Originally Posted by Pete from Prescott View Post
    Not sure I understand...
    ..."should be rebuild firmware if the HDD fault".
    reload firmware

  5. #5
    Master Of The Obvious 10,000+ Posts
    Toshiba 2830c - Display/Op Panel blank.

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,634
    Rep Power
    375

    Re: Toshiba 2830c - Display/Op Panel blank.

    I just changed a HDD on one of these last week. It was an 80GB SATA Drive.

    That being said, even if the machine is in perfect condition it's hard to justify spending any money on it. It's been obsolete for over 5 years. The last remaining machines are just limping along until they die.
    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here