Results 1 to 10 of 10
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jan 2008
    Posts
    114
    Rep Power
    0

    Cool Where do i have it? for pro.

    Hi all Pro. Tech !

    I look for codes after "line adjustment mode" maybe it is "2 level code", Pm me if any idea.

    Thanks and Best Regards.

  2. #2
    Technician
    Join Date
    Jun 2016
    Location
    new york
    Posts
    16
    Rep Power
    0

    Re: Where do i have it? for pro.

    wow !

    i am not pro. so not idea

  3. #3
    Service Manager 10,000+ Posts
    Where do i have it? for pro.

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,079
    Rep Power
    368

    Re: Where do i have it? for pro.

    Quote Originally Posted by MUMMIM View Post
    Hi all Pro. Tech !

    I look for codes after "line adjustment mode" maybe it is "2 level code", Pm me if any idea.

    Thanks and Best Regards.
    codes and procedure is in the manual

    what MODEL are you talking about?

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Jan 2008
    Posts
    114
    Rep Power
    0

    Thumbs up Re: Where do i have it? for pro.

    Quote Originally Posted by Phil B. View Post
    codes and procedure is in the manual

    what MODEL are you talking about?
    In the manual isn't show it, the manual is only show before "Line adjustment mode" code.

    ex. 08-968 when 203 -1 at e230-232-350....

    Need for series have 4 number codes . from e 206 ...

    any idea else

    Thanhs.

  5. #5
    Service Manager 10,000+ Posts
    Where do i have it? for pro.

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    14,079
    Rep Power
    368

    Re: Where do i have it? for pro.

    Quote Originally Posted by MUMMIM View Post
    In the manual isn't show it, the manual is only show before "Line adjustment mode" code.

    ex. 08-968 when 203 -1 at e230-232-350....

    Need for series have 4 number codes . from e 206 ...

    any idea else

    Thanhs.
    look in ADJUSTMENTS

    i have never seen a Tosh manual that doesn't cover line adjustment

    did you clean the patch sensor?

  6. #6
    Master Of The Obvious 10,000+ Posts
    Where do i have it? for pro.

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,476
    Rep Power
    370

    Re: Where do i have it? for pro.

    Line adjustment mode for eS206 is 08-9010.

    So what is this line adjustment mode used for? Neither manual explains what it is for.
    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  7. #7
    Trusted Tech 50+ Posts Thayer's Avatar
    Join Date
    Dec 2017
    Location
    Burton, MI
    Posts
    71
    Rep Power
    8

    Re: Where do i have it? for pro.

    "Line mode "
    Is usually used to turn off meter counter, but doesn't allow machine to calibrate.
    Allows tech to run prints and not add clicks on customer.
    Be careful and remember to turn it back off. Otherwise customer will be getting lots of free copies.

  8. #8
    Service Manager 2,500+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    4,013
    Rep Power
    184

    Re: Where do i have it? for pro.

    Quote Originally Posted by Thayer View Post
    "Line mode "
    Is usually used to turn off meter counter, but doesn't allow machine to calibrate.
    Allows tech to run prints and not add clicks on customer.
    Be careful and remember to turn it back off. Otherwise customer will be getting lots of free copies.
    Yep I believe so at least it was when I was doing Toshy.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  9. #9
    Senior Tech 100+ Posts Vincent128's Avatar
    Join Date
    Sep 2015
    Posts
    220
    Rep Power
    18

    Re: Where do i have it? for pro.

    0 - for factory shipment (meaning normal operation after leaving the factory)
    1 - for Line (meaning for use of the engine while it's still in the the Production Line - Most notably, it disables the total counter)

  10. #10
    Senior Tech 100+ Posts
    Join Date
    Jan 2008
    Posts
    114
    Rep Power
    0

    Cool Re: Where do i have it? for pro.

    Hi all !

    Understood ! it is very importance when we use line adjustment mode. So i don't write direct here about it.

    anybody haven't used it - don't put that code.

    This code is deep interpose the machine, open some code or mode that been hidden by Toshiba. It can clean and reset sensors, machine, correct some wrong which 08 code can't.

    i wrote : maybe it is "2 level code". any idea else?

    i am looking for it, if anybody have (machines number 4 code), pm me pls.

    Thanks all

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here