Dislikes:
0
-
Re: Toshiba e-Studio 255 - CB30 Error
The e255 was discontinued long ago and is no longer supported by Toshiba.
It appears the issue is with the Finisher. Just remove it and be happy.
Donations do not come with service contracts.
-
Re: Toshiba e-Studio 255 - CB30 Error
Error codes are in the service Handbook on these and not the service manual
Tray lift motor abnormality: The tray lift motor is not
rotating normally or the delivery tray is not moving
normally. [MJ-1025]
Tray 1/Tray 2 shift motor abnormality: Tray 1/Tray 2 shift
motor is not rotating or delivery tray is not moving
normally. [MJ-1024]
Movable tray shift motor abnormality: The movable tray
shift motor is not rotating or the movable tray is not
moving normally. [MJ-1101]
Is what my info states
This points to the Finisher - could be half a dozen things. Being an unknown copier you did not install or ship to the customer ...frame damage, gears out of place, sensors broken/bad, missing parts..who knows....I'd take off the bridge unit and finisher and use it that way - support is discontinued and your going to be in it deep time wise troubleshooting.
-
Technician
- Rep Power
- 0
Re: Toshiba e-Studio 255 - CB30 Error
Thank you everyone for all your inputs!
Disabling or Bypassing the Tray 1 resolved the issue.
Not really totally resolved, but end-user is okay with that.
Cheers!!!!!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks