Results 1 to 4 of 4

Thread: toshiba 5055c

  1. #1
    Technician
    toshiba 5055c


    Join Date
    Jul 2020
    Location
    canton Ohio
    Posts
    10
    Rep Power
    4

    toshiba 5055c

    rebuilding a fuser and there is a woven nylon pad that is really mangled. has anyone rebuilt one of these and just removed the pad?

  2. #2
    Master Of The Obvious 10,000+ Posts
    toshiba 5055c

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,633
    Rep Power
    375

    Re: toshiba 5055c

    It won't run without it. It's a teflon sheet, that has a special oil. If you leave it off (and I've seen it done) the fuser sleeve will last less than a week.

    You'll notice in the kit a packet of screws? They are slightly larger that the original screws. The original screws tend to back out and let go of the teflon sheet. Then thats what you get.

    =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Senior Tech 100+ Posts Vincent128's Avatar
    Join Date
    Sep 2015
    Posts
    225
    Rep Power
    18

    Re: toshiba 5055c

    What the Cat said

    Also, I would really read and re-read the instructions before rebuilding one of these - lots of little things to remove and lay out and not break and there is...a feel to refilling the oil. Search the forum, the console color box is very similar in design.

    Use EVERY drop of the kit's oil and don't spill any or allow it to leak out during reassembly. With the hot roller and heating core out of it's holders and in your paws, it's quite fragile and you don't want to have to re-build one of these twice...

  4. #4
    Senior Tech 100+ Posts Rusty.Harris's Avatar
    Join Date
    Jan 2021
    Location
    Springfield, MO
    Posts
    147
    Rep Power
    4

    Re: toshiba 5055c

    And make sure when you replace that pad, you get it in there EXACTLY straight, no bends or ripples. And make sure those
    replacement screws are used and TIGHT.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here