Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: 3015AC CA00

  1. #1
    Junior Member
    Join Date
    Nov 2020
    Location
    wa
    Posts
    2
    Rep Power
    0

    3015AC CA00

    We have machine that trows CA00 each time i try to do FS-05-4719 (Forced performing of color registration. All colors formed on transfer belt(photo in attachment). FS-05-4720-0 returns 85: All colors on the rear side detection abnormality. I did check rear side sensor and cleaned it couple times. In 03 it show that the sensor is not working, front and center is lighting up. I have heard that it's very unlikely that sensor went bad. My question is did anyone change this sensor or have any ideas what to check next?
    Machine is 2 years old, has 170k copies and brand new dev-kit black and new drums and grids for colors(before replacement it also gave CA00).
    Attached Images Attached Images

  2. #2
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,512
    Rep Power
    125

    Re: 3015AC CA00

    It is rare for these to fail. I believe these sensors are the same so you could swap front and rear and see if problem moves with sensor....


    Failing to plan is planning to fail!!!

  3. #3
    Senior Tech 250+ Posts
    3015AC CA00

    arnh79's Avatar
    Join Date
    Apr 2010
    Location
    Canada
    Posts
    445
    Rep Power
    43

    Re: 3015AC CA00

    It might be worth checking the shutter assembly for the IQC sensors. There is a weakness on the first version of that assembly. The pin that the shutter swivels on breaks. Do an output test to see if the shutter moves. If the shutter doesn't move then you'll get CA00 because the sensors are looking at black plastic instead of the belt. I've had this happen on 2 machines in my territory.
    Why does every customer think they're the first one to ever say: "you've been here so much we should get you an office, ha, ha, ha"?

  4. #4
    Technician
    Join Date
    Jun 2020
    Location
    Napoli
    Posts
    20
    Rep Power
    8

    Re: 3015AC CA00

    e-STUDIO2515AC/3015AC/3515AC/4515AC/5015AC


    ca00.jpg

  5. #5
    Master Of The Obvious 10,000+ Posts
    3015AC CA00

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,445
    Rep Power
    462

    Re: 3015AC CA00

    Quote Originally Posted by arnh79 View Post
    It might be worth checking the shutter assembly for the IQC sensors. There is a weakness on the first version of that assembly. The pin that the shutter swivels on breaks. Do an output test to see if the shutter moves. If the shutter doesn't move then you'll get CA00 because the sensors are looking at black plastic instead of the belt. I've had this happen on 2 machines in my territory.

    +1 on this. I've MacGuyvered one of these myself. The post that the lever swivels on breaks off. Do I have a photo? Yes:

    Patch Shutter.jpgPatch Sensor Shutter2.jpg

    I had a shoulder screw just the right size. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Junior Member
    Join Date
    Nov 2020
    Location
    wa
    Posts
    2
    Rep Power
    0

    Re: 3015AC CA00

    Quote Originally Posted by blackcat4866 View Post
    +1 on this. I've MacGuyvered one of these myself. The post that the lever swivels on breaks off. Do I have a photo? Yes:

    Patch Shutter.jpgPatch Sensor Shutter2.jpg

    I had a shoulder screw just the right size. =^..^=
    You guys were right it was the shutter not opening fully.
    Fixed it the same way with a screw.
    Thank you for help 🙂

  7. #7
    Field Supervisor 500+ Posts
    3015AC CA00


    Join Date
    Jan 2021
    Location
    Springfield, MO
    Posts
    504
    Rep Power
    25

    Re: 3015AC CA00

    Quote Originally Posted by arnh79 View Post
    It might be worth checking the shutter assembly for the IQC sensors. There is a weakness on the first version of that assembly. The pin that the shutter swivels on breaks. Do an output test to see if the shutter moves. If the shutter doesn't move then you'll get CA00 because the sensors are looking at black plastic instead of the belt. I've had this happen on 2 machines in my territory.

    2nd that as well. I've seen that a few times on the 05C series machines as well.

  8. #8
    Trusted Tech 50+ Posts Bicyclerepairman's Avatar
    Join Date
    Jan 2014
    Location
    OR
    Posts
    63
    Rep Power
    21

    Re: 3015AC CA00

    I've had an issue with these sensors units where the harness wire was pinched causing a color registration issue. Not sure if it threw a CA00 or CE40 but the gamma chart looked freaky...the color blocks did not line up at all.
    Re routed the harness to fix...seen this happen twice.

  9. #9
    Service Manager
    Join Date
    Oct 2019
    Location
    Sale
    Posts
    6
    Rep Power
    0

    Re: 3015AC CA00

    Over here in Australia we have had same issue many times. Has only been on 15 series not 05.
    Toshiba provided us with a spare part modification.6LK50637000 – ASYS-BRKT-LINK-SUP which we can order as a spare part. Sorry but photo wont upload...

  10. #10
    Service Manager
    Join Date
    Oct 2019
    Location
    Sale
    Posts
    6
    Rep Power
    0

    Re: 3015AC CA00

    Photo for previous post...
    Attached Images Attached Images

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here