Results 1 to 6 of 6
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jan 2017
    Location
    palm bay florida
    Posts
    97
    Rep Power
    10

    e-studio 307 hard drive install

    got f101-1 formatted hard drive loaded firmware didnt work
    replaced hard drive from a working machine did key backup and restore formatted drive loaded firmware did key backup and recovered key and license
    all said complete and sucessful rebooted the mfp and it wont come out of rainbow screen saying checking system pleas dont turn off I think I had this before but cant remember
    will it come on after a long time or did i do something wrong
    thanks for your help
    bruce

  2. #2
    Master Of The Obvious 10,000+ Posts
    e-studio 307 hard drive install

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,625
    Rep Power
    375

    Re: e-studio 307 hard drive install

    If I read that correctly, you went wrong when you tried to use the data on the working hard drive. Each machine has a unique encryption key, and cannot read data from another machine's drive.

    So, format the working drive, and reload firmware like it's an empty drive. All data will be loaded with the correct encryption and will read correctly. Was that clear? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Jan 2017
    Location
    palm bay florida
    Posts
    97
    Rep Power
    10

    Re: e-studio 307 hard drive install

    I did format the drive using 3c assist mode should i use 4c factory format to completly erase the hard drive then reload the firmware

  4. #4
    Master Of The Obvious 10,000+ Posts
    e-studio 307 hard drive install

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,625
    Rep Power
    375

    Re: e-studio 307 hard drive install

    I'm surprised that 3C > format wasn't enough. Yes 4C next.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Jan 2017
    Location
    palm bay florida
    Posts
    97
    Rep Power
    10

    Re: e-studio 307 hard drive install

    well I went in today and the machine was sitting there ready to go I made copies fine the only thing that changed was the ip address so i fixed that and all is well
    my customer told me about an hour after i left the machine started running so i guess and i think i remmeber this from a while ago it took over an hour for the machine to initialize the firmware upgrade
    thanks for your help all is well now

  6. #6
    Master Of The Obvious 10,000+ Posts
    e-studio 307 hard drive install

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,625
    Rep Power
    375

    Re: e-studio 307 hard drive install

    Congratulations. Loire 2X are notoriously slow booting back from a firmware update. At one point I called another tech because 08 mode had not yet come up after 25 minutes. He said to wait another 20minutes, nothing to worry about yet. =^..^=
    Last edited by blackcat4866; 06-17-2021 at 12:35 AM.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here