Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6

Thread: eb50

  1. #1
    Junior Member
    Join Date
    Nov 2020
    Location
    cape town
    Posts
    3
    Rep Power
    0

    eb50

    is anyone having eb50 errors on the new range toshiba's especially 6518 and 8518

  2. #2
    Technician
    Join Date
    Oct 2017
    Location
    Cave Springs
    Posts
    29
    Rep Power
    14

    Re: eb50

    No sir

  3. #3
    Master Of The Obvious 10,000+ Posts
    eb50

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: eb50

    EB50's are usually doublefeeds. Has you're separation roller gone flat? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  4. #4
    Junior Member
    Join Date
    Nov 2020
    Location
    cape town
    Posts
    3
    Rep Power
    0

    Re: eb50

    I have replaced the feed wheel pm kit, the feed clutches and paper detection lever. The machines run like 1000 prints no jams so I leave the client but before end of day they have called back wit same error. I have also adjusted the separation tension on the feed section.

  5. #5
    Master Of The Obvious 10,000+ Posts
    eb50

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: eb50

    How did you adjust it? For additional page separation, you want less tension on the spring. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  6. #6
    Field Supervisor 500+ Posts
    eb50

    Blizzoo's Avatar
    Join Date
    Aug 2013
    Location
    east europe
    Posts
    580
    Rep Power
    30

    Re: eb50

    Adjusting that separation spring tension helps with this double feeding. Decrease the tension a bit more as blackcat said for a better separation, you will probably see the separation roller getting wear down much faster
    Defects are simple, our mind is complicated

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here