Thanks: 
Likes: 
Dislikes: Hi
Recently i face a problem, I can't update firmware normally. I think I need alternate way to update firmware, Does any one have ROM RECOVERY firmware ? Willing to pay.
Thanks in advance
Sent from my ELS-NX9 using Tapatalk
Hi
Recently i face a problem, I can't update firmware normally. I think I need alternate way to update firmware, Does any one have ROM RECOVERY firmware ? Willing to pay.
Thanks in advance
Sent from my ELS-NX9 using Tapatalk
Did you try a new USB2.0 stick, formatted FAT32, 2GB or less in size? Have you tried the other USB port on the print card? It sounds like the machine is not recognizing the USB stick. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
I input normal firmware in usb flash drive . I think in this recovery mode normal firmware do not support, Machine need ROM RECOVERY firmware.Originally Posted by blackcat4866
I think the USB drive you are using is corrupted. Buy a new one or format the one you have and try again.
If you use the same USB drive over and over and do not eject it via right click rather than simply pulling it out of a computer there is a high chance you have corrupted the USB drive.
Your PM inbox it's full....
Can you share your email address via PM?
Defects are simple, our mind is complicated
Many many thanks to you
Reply With Quote
Bookmarks