Results 1 to 10 of 10
  1. #1
    Junior Member
    Join Date
    May 2021
    Location
    Strabane
    Posts
    7
    Rep Power
    0

    Toner on transfer belt

    Hi all,

    After replacing the transfer belt on the e studio 281c there is a lot of toner dumped on the belt which leaves a 40mm line of toner on the page - I have to clean the 2nd transfer roller and the transfer belt and eventually it goes away with clean prints, unfortunately after a restart this has happened again - can anyone please tell me what causes this and how to fix it?

  2. #2
    Service Manager 5,000+ Posts
    Toner on transfer belt

    SalesServiceGuy's Avatar
    Join Date
    Dec 2009
    Location
    Nova Scotia
    Posts
    7,731
    Rep Power
    225

    Re: Toner on transfer belt

    Quote Originally Posted by ryan123 View Post
    Hi all,

    After replacing the transfer belt on the e studio 281c there is a lot of toner dumped on the belt which leaves a 40mm line of toner on the page - I have to clean the 2nd transfer roller and the transfer belt and eventually it goes away with clean prints, unfortunately after a restart this has happened again - can anyone please tell me what causes this and how to fix it?
    ... decline any further service attempts and offer to upgrade this horrible copier to at least a used e2555c or e2505Ac or preferably a new e389cs/ e330Ac/ e2010Ac or e2515AC.

    You are doing both yourself and the customer a favour.

    If the customer says no, walk away and sleep easy.

    Toshiba Tec discontinued all parts and support on this dog more than ten years ago.

  3. #3
    Junior Member
    Join Date
    May 2021
    Location
    Strabane
    Posts
    7
    Rep Power
    0

    Re: Toner on transfer belt

    Unfortunately I am the customer - this is my own machine.

  4. #4
    Master Of The Obvious 10,000+ Posts
    Toner on transfer belt

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,471
    Rep Power
    463

    Re: Toner on transfer belt

    Give up on this dog. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Service Manager 5,000+ Posts
    Toner on transfer belt

    SalesServiceGuy's Avatar
    Join Date
    Dec 2009
    Location
    Nova Scotia
    Posts
    7,731
    Rep Power
    225

    Re: Toner on transfer belt

    Quote Originally Posted by ryan123 View Post
    Unfortunately I am the customer - this is my own machine.

    ... then you own one of the worst copiers Toshiba ever made.

  6. #6
    Junior Member
    Join Date
    May 2021
    Location
    Strabane
    Posts
    7
    Rep Power
    0

    Re: Toner on transfer belt

    Quote Originally Posted by blackcat4866 View Post
    Give up on this dog. =^..^=
    I would if I could afford to, the counter is only at 7500 copies - was hoping to keep it going, at least till we get to the other side of this pandemic.

  7. #7
    Service Manager 10,000+ Posts
    Toner on transfer belt

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,790
    Rep Power
    661

    Re: Toner on transfer belt

    Quote Originally Posted by blackcat4866 View Post
    Give up on this dog. =^..^=
    +2

    Sent from my SM-G960U using Tapatalk

  8. #8
    I can turn a screw... 250+ Posts pacman's Avatar
    Join Date
    Apr 2009
    Location
    Phoenix, AZ
    Posts
    306
    Rep Power
    34

    Re: Toner on transfer belt

    Quote Originally Posted by SalesServiceGuy View Post
    ... then you own one of the worst copiers Toshiba ever made.
    OOF. I think we got into Toshiba right after this, starting with 40c series and the Okidata 4545x branding.

  9. #9
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,515
    Rep Power
    126
    Failing to plan is planning to fail!!!

  10. #10
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,151
    Rep Power
    346

    Re: Toner on transfer belt

    Agree with other guys. However if I was enduser begging for help I will make a lot of pictures and upload them plus print sample plus how you change the belt. Do you use manuals etc.
    Overall machine is big step up from one of my worst ever nightmares Estudio 3511/4511
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here