Hello,
This Toshiba 2515 works fine for 3 years. A week ago it started to print far too light. So I did a calibration in Admin-Mode and the Print was very good then.
Two days ago all the prints (and all copies) were far too dark, see the scan.
Yellow turns into red, cyan and magenta turn into nearly black. There ist no background, means white parts of the page are good white.
So I did the calibration again, the calibration sheet is attached too. After that I got a really good print, see the scan (but my scanner is old and makes some moiré)
The print was good for only one day. Now it is dark again.
I do not like to let the customer calibrate the copier every day in admin mode.
The machine is on the same place since 3 years, the room is air conditioned.
The machine has 240.000 pages printed.
I know how to enter service mode but I have no idea what I should do.
Thanks
Frank
Bookmarks