Page 1 of 4 1234 LastLast
Results 1 to 10 of 33
  1. #1
    Junior Member
    Join Date
    Sep 2022
    Location
    Mansfield Woodhouse
    Posts
    5
    Rep Power
    0

    e Studio 2500ac wanted firmware

    Hi.
    Can someone help me? I am looking for firmware for the eStudio 2500ac printer. I had an error F101 13 and from what I found out I need a new firmware.
    Lest there be a mistake, I enclose the plate from my printer.

    Thanks

    WhatsApp Image 2022-09-15 at 09.49.26.jpg
    WhatsApp Image 2022-09-15 at 09.49.41.jpg

  2. #2
    Master Of The Obvious 10,000+ Posts
    e Studio 2500ac wanted firmware

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: e Studio 2500ac wanted firmware

    You'll need firmware, yes, but you'll probably also need a HDD.

    Were it me, I'd follow the test procedure on pg 826 of the manual, which will help you determine if the HDD is bad. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Junior Member
    Join Date
    Sep 2022
    Location
    Mansfield Woodhouse
    Posts
    5
    Rep Power
    0

    Re: e Studio 2500ac wanted firmware

    Thank you,

    I would definitely do this procedure, but I don't have a service manual. Can you send me the entire manual or at least page 826? Please

  4. #4
    Master Of The Obvious 10,000+ Posts
    e Studio 2500ac wanted firmware

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: e Studio 2500ac wanted firmware

    There you go. When you get to the part about formatting the HDD, if you format the HDD your firmware will be gone.
    =^..^=
    Attached Files Attached Files
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Junior Member
    Join Date
    Sep 2022
    Location
    Mansfield Woodhouse
    Posts
    5
    Rep Power
    0

    Re: e Studio 2500ac wanted firmware

    Thank you very much.

    I am at the stage of disk format, which means I will definitely need firmware. Can you help me?

  6. #6
    Master Of The Obvious 10,000+ Posts
    e Studio 2500ac wanted firmware

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: e Studio 2500ac wanted firmware

    I've heard that members that contribute to this website often get their wishes. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  7. #7
    Junior Member
    Join Date
    Sep 2022
    Location
    Mansfield Woodhouse
    Posts
    5
    Rep Power
    0

    Re: e Studio 2500ac wanted firmware

    My stupidity was that I watched a movie on YT where a "specialist" suggested step by step how to save my printer when there is an error F103. Of course, it appeared there that I MUST format the disk. Later it turned out to be a scammer but I have a big problem now

    Here is a link to a movie on YT, maybe someone will not be fooled by it:
    https://youtu.be/8ryixaJSjK0

  8. #8
    Junior Member
    Join Date
    Jan 2023
    Location
    Milan
    Posts
    8
    Rep Power
    0

    Re: e Studio 2500ac wanted firmware

    hi, i'm looking for e-studio 2500ac firmware, i've formatted hdd after error F101 and now i think i need a new firmware to upload by usb, right?
    thanks a lot
    Last edited by lazzimau; 01-09-2023 at 03:04 PM.

  9. #9
    Senior Tech 100+ Posts
    e Studio 2500ac wanted firmware

    aalex_bom's Avatar
    Join Date
    Jan 2008
    Location
    Mel
    Posts
    215
    Rep Power
    0

    Re: e Studio 2500ac wanted firmware

    Quote Originally Posted by lazzimau View Post
    hi, i'm looking for e-studio 2500ac firmware, i've formatted hdd after error F101 and now i think i need a new firmware to upload by usb, right?
    thanks a lot
    check PM, please

  10. #10
    Junior Member
    Join Date
    Jan 2023
    Location
    Milan
    Posts
    8
    Rep Power
    0

    Re: e Studio 2500ac wanted firmware

    to update firmware from usb i have to put in the usb the file mentusb2.o and the folder 2000AC_2500AC, right? i don't have the file mentusb2.o, help me please.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here