Hi Guys, its me again. Im a newbie
my tsb 4505AC got a message “time for periodic mainternance 010F” and when i print 200pages its going like after every 30 pages then adjusting and calibrating for a minute, then resume printing job. Is there anyway we can fix. Many thanks in advance.
It sounds to me like it's due for some maintenance. Have you looked at section 7.2.3 of your service manual ... or better yet printed off FS30-103 PM list? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Re: 4505AC time for Periodic Mainternance 010F
Yes sir, many thanks for your kindly advice. AppreciatedOriginally Posted by blackcat4866
Posting Permissions
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks