Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 4 of 4 FirstFirst 1234
Results 31 to 32 of 32
  1. #31
    Junior Member
    Join Date
    Jan 2012
    Posts
    7
    Rep Power
    0

    Lightbulb Re: Tosh 2500-c getting EO11 codes.

    after reading this topic, found a solution to my problem with estudio 2820c, almost the same copier like 2500c, 3510, and many others
    it was true something was bent, but not the chassis, or the door frame it was something else
    IN MY CASE, THE PAPER WAS CLINGING TO THE SECOND TRANSFER ROLLER, IT WAS GOING AROUND THE ROLLER. SENSOR WAS WORKING FINE.
    the issue was the bolts where the door latches onto the machine , 1 was bent inward, an it created an uneven pressure between transfer belt and transfer roller
    just straighten them and all good
    i will add 2 photos with them
    thanks to Austech for suggestions
    Attached Images Attached Images
    Last edited by idlle; 11-10-2017 at 11:26 AM. Reason: thanks were in order

  2. #32
    Master Of The Obvious 10,000+ Posts
    Tosh 2500-c getting EO11 codes.

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: Tosh 2500-c getting EO11 codes.

    I can confirm that. It's caused by the customer slamming the door. If you look at the fit of the covers with the door closed you'll see that the front or rear corner will be in too far. With the door closed too far, the separation guide projects into the paper path, snagging the paper and rolling it up around the second transfer roller.

    You can also get E011 jams from a worn out shaft and one-way gear 94T in the registration drive, a deformed or broken duplex unit latch, or labels stuck all over the second transfer roller. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here