Any guys please help me with the error code cea0 when the es 3511 still working properly. shutdown and go home. Tomorrow, error code cea0 appears.
thank you
Any guys please help me with the error code cea0 when the es 3511 still working properly. shutdown and go home. Tomorrow, error code cea0 appears.
thank you
[CEA0] Revolver home position detection abnormality
Is the revolver home position sensor working properly? May need to be cleaned.
(Perform the input check: 03-[FAX]ON/[2]/[C])
NO 1. Check if the connector or joint connector of the revolver home position sensor is
disconnected.
2. Check if the connector CN361 on the LGC board is disconnected.
3. Check if the connector pins are disconnected or the wires of harnesses are
open circuited.
4. Check if the conductor pattern on the LGC board is short circuited or open
circuited.
5. Replace the revolver home position sensor.
6. Replace the LGC board.
YES
1. Check if the conductor pattern on the LGC board is short circuited or open circuited.
2. Replace the LGC board.
This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from
Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads
Paul@justmanuals.com
Besides what is listed check the back lash and missing teeth on the revolver itself.
And Star Trek was just a tv show...yeah right!
Bookmarks