Toshiba E Studio 255

[kuby]

I don't usually work on these machines, but a customer has one of these that the document feeder will jam on the last page thru the feeder. It will go ahead on copy the documents but as the last page is exiting it will jam as if it is expecting another page. Do not have a manual for this machine yet, hoping for some insight on which switch or sensor to look at.
I have checked a couple of switches and they seem to be working, I know I am missing one.
Thanks

[Burnout]

Re: Toshiba E Studio 255

error code would help.its on the display while in jam state ie:e714 or e725 .If its a e714 it thinks theres another original thats jammed. 725 is a read sensor not clearing (just before scan glass in middle of path) torn mylars make this common) good machines overall not bad to work on too

[canonbundy]

Re: Toshiba E Studio 255

I don't usually work on these machines, but a customer has one of these that the document feeder will jam on the last page thru the feeder. It will go ahead on copy the documents but as the last page is exiting it will jam as if it is expecting another page. Do not have a manual for this machine yet, hoping for some insight on which switch or sensor to look at.
I have checked a couple of switches and they seem to be working, I know I am missing one.
Thanks

As Burnout says need error codes - check the flapper exit guide isn't broken - located under doc trays and has green zigzag tape along it, solenoid operated and breaks at the solenoid join also causes mixed document placing especially 2 sided.

[sjinachandran]

Re: Toshiba E Studio 255

It sounds like that the document feeder original placing sensor not come to home position after last originla was feeded. check that sensor. i think it will work.

[kuby]

Re: Toshiba E Studio 255

Thanks, got it taken care of..

[djwhoo]

Re: Toshiba E Studio 255

whats the code? check the two black actuators. make sure the bracket that holds the feed tires is seated correctly. also make sure the black bracket al the way across is seated right as well. clean your tires.

[djwhoo]

Re: Toshiba E Studio 255

I don't usually work on these machines, but a customer has one of these that the document feeder will jam on the last page thru the feeder. It will go ahead on copy the documents but as the last page is exiting it will jam as if it is expecting another page. Do not have a manual for this machine yet, hoping for some insight on which switch or sensor to look at.
I have checked a couple of switches and they seem to be working, I know I am missing one.
Thanks

didja get it figured out?

[kuby]

Re: Toshiba E Studio 255

Yes one of the sensors were bad.