Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10
  1. #1
    Junior Member
    Join Date
    Nov 2011
    Posts
    8
    Rep Power
    0

    Docucolor 252 error 042-436

    Need help. We keep getting error 042-326. Tried to reset with 701-105 chain but the machine says it can't be overridden. The value in the chain has 208. We've installed a new belt but the error still comes up. Any suggestions?


    Sent from my SCH-R530C using Tapatalk
    Last edited by jlgreen19; 02-26-2016 at 02:34 PM. Reason: Wrong error code

  2. #2
    Senior Tech 250+ Posts InterfaceP's Avatar
    Join Date
    Jun 2013
    Location
    TX
    Posts
    458
    Rep Power
    18

    Re: Docucolor 252 error 042-436

    Your Fault code is 042-326 and the NVM you need to change is 741-105. But if you dont take corrective action, it will come back and/or you will damage the IBT belt.

    This is a video I shot several years ago.

    https://youtu.be/nug0CbfX-no

    Good luck!

  3. #3
    Senior Tech 250+ Posts Jake2o's Avatar
    Join Date
    Dec 2007
    Location
    Lancashire
    Posts
    310
    Rep Power
    28

    Re: Docucolor 252 error 042-436

    Have you taken the sticky paper cover off the reflective strip on the underside of the belt on the inboard side.
    If not the error will keep occurring.
    check this before you do what the guy above me said to do, or you will go round in circles forever.

  4. #4
    Junior Member
    Join Date
    Nov 2011
    Posts
    8
    Rep Power
    0

    Re: Docucolor 252 error 042-436

    Omg, no I didn't. Thanks. I just reset/initialized everything, cleaned the sensors and everything worked after that.

    Sent from my SCH-R530C using Tapatalk

  5. #5
    Senior Tech 250+ Posts InterfaceP's Avatar
    Join Date
    Jun 2013
    Location
    TX
    Posts
    458
    Rep Power
    18

    Re: Docucolor 252 error 042-436

    Quote Originally Posted by Jake2o View Post
    Have you taken the sticky paper cover off the reflective strip on the underside of the belt on the inboard side.
    If not the error will keep occurring.
    check this before you do what the guy above me said to do, or you will go round in circles forever.
    With respect, please do not do this. That coating is made of Teflon, and prevents the reflective patch from getting dirty. Removing it will cause more headaches than you want.

  6. #6
    Senior Tech 250+ Posts Jake2o's Avatar
    Join Date
    Dec 2007
    Location
    Lancashire
    Posts
    310
    Rep Power
    28

    Re: Docucolor 252 error 042-436

    Quote Originally Posted by InterfaceP View Post
    With respect, please do not do this. That coating is made of Teflon, and prevents the reflective patch from getting dirty. Removing it will cause more headaches than you want.
    But on IBT belts that i have got in the past it is a piece of paper that covers the reflective patch thereby making it not a reflective patch and you get a 042-326 instantly on powering up the machine.
    So although it will stop the patch from getting dirty it will also stop it being a reflective patch.
    I've also had belts that have nothing covering the reflective patch, ones with the teflon coating patch that work fine and others with the teflon coating that do not work properly.
    So I suppose it's a case of work with what you have.
    Last edited by Jake2o; 02-26-2016 at 09:35 PM.

  7. #7
    Trusted Tech 50+ Posts
    Join Date
    Mar 2014
    Location
    abidjan
    Posts
    63
    Rep Power
    12

    Post Re: xerox M 24

    hello dear friend I have an M24 xerox and I dragged two messages that prevent the copying draw. the messages are: TRANSFER BELT CLEAR (replace now) and SECOND BIAS TRANSFER ROLL (replace now). I replaced both Elements but nothing changes.

  8. #8
    Senior Tech 250+ Posts Jake2o's Avatar
    Join Date
    Dec 2007
    Location
    Lancashire
    Posts
    310
    Rep Power
    28

    Re: xerox M 24

    Quote Originally Posted by Apouthe Donald View Post
    hello dear friend I have an M24 xerox and I dragged two messages that prevent the copying draw. the messages are: TRANSFER BELT CLEAR (replace now) and SECOND BIAS TRANSFER ROLL (replace now). I replaced both Elements but nothing changes.
    Did you also re-set the NVM to tell the machine that a new one has been installed

  9. #9
    Trusted Tech 50+ Posts
    Join Date
    Mar 2014
    Location
    abidjan
    Posts
    63
    Rep Power
    12
    no I do is change the values and also I is not pws to change.

  10. #10
    Junior Member
    Join Date
    Sep 2015
    Posts
    2
    Rep Power
    0

    Re: xerox M 24

    Quote Originally Posted by Jake2o View Post
    Did you also re-set the NVM to tell the machine that a new one has been installed
    Its m24, he will need PWS to reset hfsi.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here