Hey guys, finally i managed to get those disks.
In the meantime. i checked ram and hdd, and tests showing that everything is fine.
So, i presume that fiery file system or similar got corrupted.
Now, i thinking about next steps;
i found
manual for Installing or Updating Fiery System Software that says:
Fiery System Installer, located on the System Software CDs, offers two methods ofinstalling system software:• Direct Installation—Allows you to reinstall system software directly through acrossover Ethernet cable connected between the Fiery and a Windows computer.This method is for use by authorised service technicians only.• Network Installation—Allows you to update system software on the Fiery through aremote network connection.
Network installation obviously wont work, because is not visible on network, and direct installation instruction says;
Follow steps 1 through 5 of the procedure “To install system software over the networkport” in the Installation and Service Guide.
Does anybody have some tips about this part of my problem?
Bookmarks