Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    Jan 2015
    Posts
    9
    Rep Power
    0

    DC 700/C70/J70 Duplex upper chute assembly

    Hi guys,

    Duplex belt is jumping beacause teethpulley on mainsahft is worn, so partlist gives no part. nr. Only order upper chute assembly. Does someone knows partnr. for pulley/clutch also? PL.4.5 item 13. Picture attached.

    Tnx,
    Duplex upper chute.jpg

  2. #2
    Senior Tech 250+ Posts
    Join Date
    Feb 2009
    Location
    Rogers, Arkansas
    Posts
    418
    Rep Power
    26

    Re: DC 700/C70/J70 Duplex upper chute assembly

    I recently had the same problem. The belt started jumping because the shafts that all the gears and pulleys that drives the duplex belt are gummed up with paper dust. You will have to pull out most of the paper path assemblys to get to the gears and idlers to remove and clean the shafts and inside. Also would be good to clean the brass bushings on the duplex drive shafts while you have access.
    Remember to leave the main tension idler loose when done to allow the belt to ride freely our it will continue to cause paper jams and jump teeth.

  3. #3
    Junior Member
    Join Date
    Jan 2015
    Posts
    9
    Rep Power
    0

    Re: DC 700/C70/J70 Duplex upper chute assembly

    Hi,

    Tnx for replay

    Yes already done this, new duplex rollers and bearings, but if clutch I described is worn also (Dup motor starts quickly) and noise will come again.

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Jun 2014
    Location
    nassau
    Posts
    135
    Rep Power
    12

    Re: DC 700/C70/J70 Duplex upper chute assembly

    Quote Originally Posted by Kawai View Post
    Hi,

    Tnx for replay

    Yes already done this, new duplex rollers and bearings, but if clutch I described is worn also (Dup motor starts quickly) and noise will come again.
    Have you found part number for the clutch?? what did you do to resolve issue?

  5. #5
    Junior Member
    Join Date
    Jan 2015
    Posts
    9
    Rep Power
    0

    Re: DC 700/C70/J70 Duplex upper chute assembly

    Quote Originally Posted by lion_heart View Post
    Have you found part number for the clutch?? what did you do to resolve issue?

    Hi,

    My solution was :

    1) New upper chute 054K35936

    2) (Optional) New Duplex Innovator Kit 655N00388. Pulleys with metal bearings

    Greetings.

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Jun 2014
    Location
    nassau
    Posts
    135
    Rep Power
    12

    Re: DC 700/C70/J70 Duplex upper chute assembly

    Quote Originally Posted by Kawai View Post
    Hi,

    My solution was :

    1) New upper chute 054K35936

    2) (Optional) New Duplex Innovator Kit 655N00388. Pulleys with metal bearings

    Greetings.
    ok will order a upper chute, thanks a mil

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here