Xerox ApeosPort-IV 7080 Fuser Replacement

[MRJESSE]

Does anyone know the NVM code to reset the fuser on Xerox ApeosPort-IV 7080?

Error code 010-906

Attempted to reset HFSI, but did not go back to 0.

[elsab]

Need a new fusing unit because fuse blown when reach its life or web detected end of life.

[alesandros]

The NVM code didn't reset the fuser unit, you must reset the blown fuse and rotating the fuser web on the other way round. Too much work and poor print quality after the repair. So unless it's something emergency, better replace it