xerox C75 with error 093-314

[Sperrin02]

Need help with error code 093-314 on Xerox C75. I can't fix. have looked through old treads and have replace yellow developer housing.

[Dech]

093-314 Dispense Broken Y
The system detected that the Dispenser is damaged.


The Dispenser Y motor has got damaged- replace the dispenser motor and reset ( test the fuse on the IOT Pwb and make sure it has not blown) Think it is F8 - if i can remember
the NVM value of the applicable color NVM [762-316 Dispense Status Y. If the value is ’3’, make sure you set it to ’0’ before performing the repair. (’0’, ’1’, and ’2’ are the values for normal)