xerox versant 80 error 099-339

[levyk]

try this

see attachment

tnx dech
it was already fixed, thats exactly what was happening!
tnx

[rowaner2002]

hi all,
having this error 099-339 Fuser Belt in Limit Fail i moved it back to position and it keeps on happening again mainly when i use 20lb paper i tried a new fuser but the problem continued, would anyone be able to specify why this is happening and what the solution? tnx much
levy

Hi
I know this is an old post , but I’m having the same fault error, could you tell me how you fixed this problem?

thank you
wayne

[Phil B.]

Hi
I know this is an old post , but I’m having the same fault error, could you tell me how you fixed this problem?

thank you
wayne

reread the thread it is explained in there

this really isn't an end user fix

[levyk]

Hi
I know this is an old post , but I’m having the same fault error, could you tell me how you fixed this problem?

thank you
wayne

hi this could happen a few problems ill attach a few solving let me know if it was helpful17.pdf13_Fuser fault 099-399.pdf12_Fuser Belt fault code 99-339.pdf

[robdemos]

Hello here, just wanted to say thanks because even in 2023 this holds up and can happen also on a versant 2100.
Solution works like charm.

[DheerajBE]

Hello here, just wanted to say thanks because even in 2023 this holds up and can happen also on a versant 2100.
Solution works like charm.

Hello all,
anyone here with EX80 fiery software and nvm s/w access tool?
I can share other models software in return

[zagrex]

you need chance

007K98681

Fuser Gear Assembly