Page 3 of 3 FirstFirst 123
Results 21 to 23 of 23
  1. #21
    Service Manager 5,000+ Posts
    Xerox 252 firmware

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    7,904
    Rep Power
    166

    Re: Xerox 252 firmware

    Quote Originally Posted by dalman View Post
    Do you mean to copy a file with USB in the dc252?
    no just a simple copy from ADF or glass

  2. #22
    Service Manager 1,000+ Posts
    Join Date
    Aug 2006
    Posts
    1,089
    Rep Power
    42

    Re: Xerox 252 firmware

    Just a copy. To see do you have a problem with machine or with fiery

  3. #23
    Senior Tech 100+ Posts
    Join Date
    Feb 2010
    Posts
    153
    Rep Power
    22

    Re: Xerox 252 firmware

    Exactly how did you put the DC252 back to factory defaults? Did you use 'Delete All Data'?

    The crossover ethernet cable between de DC252 en the Fiery bustled is only needed for scanning. The large SCSI cable takes care of communication between the Fiery and the DC252. If you boot the DC252 the Fiery should also boot. There is a tiny LCD screen on the Fiery which should display '00' if all is good. After 5 minutes or so, you should be able to find 'network controller' settings in your system settings. If it doesn't show up there, you have a defective Fiery, a bad cable, or a bad video card on the ESS.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here