Prepare a USB Flash DriveEnsure that the USB device to be used has sufficient free space to contain the files to be downloaded.
Create a new folder in the USB Flash Drive and name it DWLD.
Copy the software file(s) obtained in (unzip the file and extract the .bin file if required) into the DWLD folder.
Start Upgrade
Power OFF the machine.
NOTE:
if USB Printing is enabled, the USB port on the Control Panel can be used.
Insert the USB Flash Drive into the USB connector beneath the USB FAX port.The FAX Cable (if present) should remain plugged in during the SW upgrade. This enables the FAX software to be upgraded using this procedure.
Start the download
Power ON the machine while pressing the Energy Saver button. Hold the button down until Download Mode appears.
After a while, Transferring will be displayed on the UI and the S/W will start to download to the machine .If Transferring is not displayed after 3 minutes, there is a problem either with the USB Device or with the USB port. Make sure the Flash Drive is plugged in all the way. Repeat the procedure with a different USB device.
Prepare a USB Flash Drive
Ensure that the USB device to be used has sufficient free space to contain the files to be downloaded.
Create a new folder in the USB Flash Drive and name it DWLD.
Copy the software file(s) obtained in (unzip the file and extract the .bin file if required) into the DWLD folder.
Start Upgrade
Power OFF the machine.
NOTE:
if USB Printing is enabled, the USB port on the Control Panel can be used.
Insert the USB Flash Drive into the USB connector beneath the USB FAX port.The FAX Cable (if present) should remain plugged in during the SW upgrade. This enables the FAX software to be upgraded using this procedure.
Start the download
Power ON the machine while pressing the Energy Saver button. Hold the button down until Download Mode appears.
After a while, Transferring will be displayed on the UI and the S/W will start to download to the machine .If Transferring is not displayed after 3 minutes, there is a problem either with the USB Device or with the USB port. Make sure the Flash Drive is plugged in all the way. Repeat the procedure with a different USB device.
Bookmarks