Hello,
Getting an error when we go to print from the rip P03-201 on the rip and a 127-212 on the printer.
We have checked all connections, they are fine, even tried a new cable with same result.
Any suggestions?
Thanks
David
Hello,
Getting an error when we go to print from the rip P03-201 on the rip and a 127-212 on the printer.
We have checked all connections, they are fine, even tried a new cable with same result.
Any suggestions?
Thanks
David
Send me mail stoadis@gmail.com.
I will send you information about the error code.
I recommend a reload of software before you think about replacing the aria pwb. I have had this weird error before and a fresh reload after backing up settings fixed it.
Backup both, select all options just to cover your ass. Save to a thumb drive.
Xerox tech was in and replaced the board and the cable, neither fixed the problem. I thought I read something about the system Bios battery need to be replaced. Xerox won’t send specialist because we are T&M. Grrrr
Did you try to reload ffps software first?
Bookmarks