XEROX 6510 list NVM, temperature of the fuser!!!

[servismen11]

hi friends, please tell me how to print the list of NVM xerox 6510? can someone tell me how to raise the temperature of the fuser dC131 NVM Read / Write?

[Phil B.]

hi friends, please tell me how to print the list of NVM xerox 6510? can someone tell me how to raise the temperature of the fuser dC131 NVM Read / Write?

what problems are you having?

what are the page counts of supplies/service parts?

are you using genuine oem supplies?

do you have a service manual/pws?

are you trained on this model or any xerox model?

[servismen11]

The problem is that the toner does not burn to 200 grams of paper,the toner is erased with a finger, the client took a printer specifically for printing projects on thick paper. Xerox Colotech+ 200 paper, original Xerox toner, service manual for xerox 6510 is available, but there is no NVM sheet to raise the temperature of the fuser.

[servismen11]

do you have a service manual/pws?

are you trained on this model or any xerox model?

PWS no, I am not an authorized service center!!!
did not pass training(

[Phil B.]

The problem is that the toner does not burn to 200 grams of paper,the toner is erased with a finger, the client took a printer specifically for printing projects on thick paper. Xerox Colotech+ 200 paper, original Xerox toner, service manual for xerox 6510 is available, but there is no NVM sheet to raise the temperature of the fuser.

How many pages on the fuser?
ASSuming this is a print job, what weight/type of paper is selected in the page profile?
Does it match the paper tray profile?
Usually if the paper isn't defined properly this is the end result (ASSuming the fuser is in good condition)


Sent from my SM-G960U using Tapatalk

[servismen11]

I use tray 1, put stickers and other paper in the printer's print settings, raised the temperature of the fuser to 6, the toner does not bake on paper 200mm! on paper with a thickness of 150mm, the toner holds up normally! On the printer there is no possibility to set the settings for the paper type cardboard, only in the driver, the temperature of the fuser can not be raised through the usual printer menu on cardboard 160-220mm! The printer is new, just a month old, the authorized service center refuses to help with this problem, they say so and goes from the factory, although the manual says that the printer supports printing on cardboard 160-220 mm!

[Phil B.]

I use tray 1, put stickers and other paper in the printer's print settings, raised the temperature of the fuser to 6, the toner does not bake on paper 200mm! on paper with a thickness of 150mm, the toner holds up normally! On the printer there is no possibility to set the settings for the paper type cardboard, only in the driver, the temperature of the fuser can not be raised through the usual printer menu on cardboard 160-220mm! The printer is new, just a month old, the authorized service center refuses to help with this problem, they say so and goes from the factory, although the manual says that the printer supports printing on cardboard 160-220 mm!

and you STILL haven't mentioned WHAT the driver is set for... glossy labels are a tougher issue.

[xcopytech]

You must set up tray for that paper.
Read user guide.

[Phil B.]

You must set up tray for that paper.
Read user guide.

But But But he says that cannot be done! He should turn this over to someone qualified to handle the simple shit.

[servismen11]

and you STILL haven't mentioned WHAT the driver is set for... glossy labels are a tougher issue.

the driver has stickers installed, put different settings, you can put cardboard in the driver, but you can't put it in the printer, so it gives an error when printing