Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jun 2014
    Location
    nassau
    Posts
    139
    Rep Power
    14

    xerox 700 045-360

    Good day, hope all is well, seem to be getting this 045-360 error code of my 700 a lot, running external Fiery, I restored my fiery server, hoping that was the cause but same issue. and the RAP gives such a vague description of the error code. any help would be appreciated.

  2. #2
    Senior Tech 250+ Posts InterfaceP's Avatar
    Join Date
    Jun 2013
    Location
    TX
    Posts
    467
    Rep Power
    20

    Re: xerox 700 045-360

    Do you have a External or Bustled Fiery and do you have another of either?

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jun 2014
    Location
    nassau
    Posts
    139
    Rep Power
    14

    Re: xerox 700 045-360

    Quote Originally Posted by InterfaceP View Post
    Do you have a External or Bustled Fiery and do you have another of either?
    This machine is External Fiery, I do have an integrated as a backup, and my creo for next machine went down waiting motherboard for that this week, so would have Creo also

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Feb 2010
    Posts
    174
    Rep Power
    23

    xerox 700 045-360

    045-360 is related to the ROS (laser unit). Could be the flat cables (most likely), or laser M,Y or MCU.
    Last edited by Detonation; 4 Weeks Ago at 02:14 PM.

  5. #5
    Agitating Artificer 250+ Posts CopierTechofOmens's Avatar
    Join Date
    Jan 2009
    Location
    NY
    Posts
    251
    Rep Power
    27

    Re: xerox 700 045-360

    • Reseat the interface cable between the DFE and the IOT
    • Refer to the latest Software Release Notes to ensure that the latest software level located in the software matrix is loaded in the machine
    • Reseat the VSEL PWB into the Backplane PWB
    • On Fiery Bustled or EX700 Controlers ensure that the interface PWB is P/N 116N00264 or newer. Replace as required
    • On FFPS Controllers ensure that the interface cable is the 3M Cable with metal connectors (117K44230). Tighten the connectors with a screw driver.
    • On FFPS Controllers ensure that the XIMM PWB is 960K51691 or newer
    • Check that the flat cables are securely connected to the YM ROS and the MCU PWB
    • Install Tag 3 VESL PWB
    • Replace the Flat Cable

    • Replace the YM ROS

    • Replace the MCU PWB

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here