Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Trusted Tech 50+ Posts
    WC7132 error 089-311


    Join Date
    May 2010
    Location
    Grovetown, GA
    Posts
    68
    Rep Power
    21

    WC7132 error 089-311

    Hi all, I have this error and have confirmed that the silver position mark is there and clean. The problem is I'm not sure where to begin finding the sensor for it or how to remove the ITB. Thanks in advance, Scott.

  2. #2
    Junior Member
    Join Date
    Jul 2019
    Location
    Mexico
    Posts
    6
    Rep Power
    0

    Re: WC7132 error 089-311

    Quote Originally Posted by sostek View Post
    Hi all, I have this error and have confirmed that the silver position mark is there and clean. The problem is I'm not sure where to begin finding the sensor for it or how to remove the ITB. Thanks in advance, Scott.
    Found the eureka Tec Tip about the IBT Belt drive roll bearing wich is kept in place by a simple rather thin metal plate wich can be deformed sometimes. This causes squeeky noise and can cause a bad /loose contact between drive roll and drive dock at the backside in the machine. We carefully pulled the metal back to its position to reduce / remove the free space. We also decided to replace the 2nd BTR Roller since its far from beeing good and may cause problems with the new IBT Belt unit.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here