Thanks Thanks:  0
Dislikes Dislikes:  0
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11
    Senior Tech 250+ Posts
    Xerox WC 7830 Developer change


    Join Date
    Feb 2010
    Posts
    331
    Rep Power
    33

    Re: Xerox WC 7830 Developer change

    Quote Originally Posted by weetu View Post
    Press and HOLD <STOP> button for 10 seconds. Then enter 6,7,8,9.

    The machine has to be in normal copying state eg. Services, E-Mail etc. visible on the touch screen.
    Don't reset anything while in Service Mode. You just want to enter the ATC value, eh?

    GL
    Haven't checked if that works, but AFAIK you should press on hold the 0 button for at least 5 seconds, and then, while you keep holding it, press the green start button. Then it will ask you for a code, which is 6789. Then, the diagnostics menu will be unlocked from the utilities (common settings)

  2. #12
    Technician
    Xerox WC 7830 Developer change


    Join Date
    Jan 2017
    Location
    San Fernando, CA
    Posts
    21
    Rep Power
    0

    Re: Xerox WC 7830 Developer change

    Quote Originally Posted by weetu View Post
    Press and HOLD <STOP> button for 10 seconds. Then enter 6,7,8,9.

    The machine has to be in normal copying state eg. Services, E-Mail etc. visible on the touch screen.
    Don't reset anything while in Service Mode. You just want to enter the ATC value, eh?



    GL
    Yeah, either calibrate the new sensor or enter the value it should be set to.

    Thanks!

  3. #13
    Technician
    Xerox WC 7830 Developer change


    Join Date
    Jan 2017
    Location
    San Fernando, CA
    Posts
    21
    Rep Power
    0

    Re: Xerox WC 7830 Developer change

    Quote Originally Posted by Detonation View Post
    Haven't checked if that works, but AFAIK you should press on hold the 0 button for at least 5 seconds, and then, while you keep holding it, press the green start button. Then it will ask you for a code, which is 6789. Then, the diagnostics menu will be unlocked from the utilities (common settings)
    Thank you, I will post a reply with results.

  4. #14
    Technician weetu's Avatar
    Join Date
    Jun 2020
    Location
    Lahti
    Posts
    12
    Rep Power
    8

    Re: Xerox WC 7830 Developer change

    Quote Originally Posted by LATechnico View Post
    Yeah, either calibrate the new sensor or enter the value it should be set to.

    Thanks!
    Yes, the right procedure is to press ZERO (10 secs), the START and 6,7,8,9

    As I do this daily its is so automated that I gave wrong advise, sorry.

  5. #15
    Senior Tech 100+ Posts
    Xerox WC 7830 Developer change


    Join Date
    Oct 2010
    Location
    Walworth, NY
    Posts
    231
    Rep Power
    30

    Re: Xerox WC 7830 Developer change

    Quote Originally Posted by LATechnico View Post
    Hi guys,

    I have a Xerox WC 7830i that was over adding and dumping Cyan toner. I've decided to change the developing unit and developer. Do I need to run a set up procedure for new developing unit? Or should it print ok without a set up. Not familiar with Xerox, any help is greatly appreciated!
    Lat, Non OEM toner will cause that. If you replace the housing with carrier that came from OEM toner, and use OEM toner there after, you will be good to go. The waste auger for the cyan drum may also have a problem.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here