Hello all, I have a Xerox Workcentre 5755 and recently had some booting problems with it. I changed the little yellow battery on the SW module and did an Altboot. Anyways now for some reason when my machine boots up it takes a really long time and on the green boot screen it says Workcentre 5765 instead of 5755 and when it finally boots into the UI screen after a few seconds, a fault message pops up saying no scanning or printing available.

Also, from my observation when I power up the machine the main drive does turn on as it usually suppose to do. No drum cleaning, no tray checks, nothing of the sorts.

Really hope one of you can be able to guide me what to do next. Thanks in advance for any information.